kw.\*:("Mecanizado en seco")
Results 1 to 25 of 130
Selection :
The Possibilities and Limitations of DRY MACHINING : Metalworking Fluids. A 48-page special section STLECANTER, Neil.Tribology & lubrication technology. 2009, Vol 65, Num 3, pp 40-44, issn 1545-858X, 5 p.Article
Magnesium : das Leichtgewicht unter den NichteisenmetallenHÖRNER, D.Tribologie und Schmierungstechnik. 2006, Vol 53, Num 3, pp 36-42, issn 0724-3472, 7 p.Article
Machined surface image analysis when turning with modified cutting pointsZAWADA-TOMKIEWICZ, Anna; STORCH, Borys.International journal of machining and machinability of materials (Print). 2009, Vol 5, Num 2-3, pp 278-289, issn 1748-5711, 12 p.Article
Assessing the Performance of a Magnetostrictive-Actuated Tool Holder to Achieve Axial Modulations with Application to Dry Deep Hole DrillingFILIPOVIC, Aleksandar J; SUTHERLAND, John W.Journal of manufacturing processes. 2007, Vol 9, Num 2, pp 75-86, issn 1526-6125, 12 p.Article
Modelling of the heat input for face-milling processesPABST, R; FLEISCHER, J; MICHNA, J et al.CIRP annals. 2010, Vol 59, Num 1, pp 121-124, issn 0007-8506, 4 p.Conference Paper
Luftlager -Teil 1: Systematik der LuftlagerHEINZL, J.Tribologie und Schmierungstechnik. 2009, Vol 56, Num 1, pp 16-23, issn 0724-3472, 8 p.Article
Metal working fluids: finding green in the manufacturing processSINIAWSKI, Matthew; BOWMAN, Chris.Industrial lubrication and tribology. 2009, Vol 61, Num 2-3, pp 60-66, issn 0036-8792, 7 p.Article
The influence of cryogenic cooling on process stability in turning operationsPUSAVEC, F; GOVEKAR, E; KOPAC, J et al.CIRP annals. 2011, Vol 60, Num 1, pp 101-104, issn 0007-8506, 4 p.Conference Paper
Prediction of parameters for the burr dimensions in short-hole drillingHEISEL, U; LUIK, M; EISSELER, R et al.CIRP annals. 2005, Vol 54, Num 1, pp 79-82, issn 0007-8506, 4 p.Conference Paper
Burr minimization in face milling: an edge bevelling approach : ADVANCES IN MACHINING TECHNOLOGY: 36TH INTERNATIONAL MATADOR CONFERENCEPRATIM, S. P; DAS, S.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2011, Vol 225, Num 9, pp 1528-1534, issn 0954-4054, 7 p.Article
Investigation on the effect of spark gap in dry μ-electro discharge machining of SiC-10BN nano-composite : ADVANCED MACHINING PROCESSESPAUL, Goutam; DAS, Mitun; GHATAK, S et al.International journal of manufacturing technology and management. 2012, Vol 24, Num 1-4, pp 71-87, issn 1368-2148, 17 p.Article
Surface layer properties of AISI 316L steel when turning under dry and with minimum quantity lubrication conditionsLEPPERT, T.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2012, Vol 226, Num 4, pp 617-631, issn 0954-4054, 15 p.Article
Drilling of Al―Mg―Cu alloys and Al―Mg―Cu/SiC compositesALRASHDAN, Abdalla; MAYYAS, Ahmad T; ABDEL MAHAMOOD HASSAN et al.Journal of composite materials. 2011, Vol 45, Num 20, pp 2091-2101, issn 0021-9983, 11 p.Article
Effects of Lubrication Mode on Friction and Heat Partition Coefficients at the Tool-Work Material Interface in MachiningMONDELIN, A; CLAUDIN, C; RECH, J et al.Tribology transactions. 2011, Vol 54, Num 2, pp 247-255, issn 1040-2004, 9 p.Article
Design optimisation of flank wear and surface roughness for CBN-TiN tools during dry hard turning of hot work die steelDUREJA, J. S; GUPTA, V. K; SHARMA, Vishal S et al.International journal of machining and machinability of materials (Print). 2010, Vol 7, Num 1-2, pp 129-147, issn 1748-5711, 19 p.Article
Surface integrity of dry machined titanium alloysGINTING, A; NOUARI, M.International journal of machine tools & manufacture. 2009, Vol 49, Num 3-4, pp 325-332, issn 0890-6955, 8 p.Article
AN INVESTIGATION INTO DIMENSIONAL ACCURACY AND SURFACE FINISH ACHIEVABLE IN DRY TURNINGRAFAI, N. H; ISLAM, M. N.Machining science and technology. 2009, Vol 13, Num 4, pp 571-589, issn 1091-0344, 19 p.Article
Influence of tool wear on surface roughness in hard turning using differently shaped ceramic toolsGRZESIK, W.Wear. 2008, Vol 265, Num 3-4, pp 327-335, issn 0043-1648, 9 p.Article
Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coatingNING, L; VELDHUIS, S. C; YAMAMOTO, K et al.International journal of machine tools & manufacture. 2008, Vol 48, Num 6, pp 656-665, issn 0890-6955, 10 p.Article
Zerspanung von TitanlegierungenWALTER, A.Tribologie und Schmierungstechnik. 2007, Vol 54, Num 1, pp 30-36, issn 0724-3472, 7 p.Article
Investigation of nano-structured pvd coatings for dry high-speed machiningLI NING; VELDHUIS, Stephen C; YAMAMOTO, Kenji et al.Machining science and technology. 2007, Vol 11, Num 1, pp 45-59, issn 1091-0344, 15 p.Article
An improved three-dimensional inverse heat conduction procedure to determine the tool-chip interface temperature in dry turningLIANG LIANG; HAO XU; ZHIYONG KE et al.International journal of thermal sciences. 2013, Vol 64, pp 152-161, issn 1290-0729, 10 p.Article
Modelling of machining force components during turning of PEEK CF30 by TiN coated cutting tools using artificial intelligenceMATA, Francisco; HANAFI, Issam; BEAMUD, Elena et al.International journal of machining and machinability of materials (Print). 2012, Vol 11, Num 3, pp 263-279, issn 1748-5711, 17 p.Article
Effect of Nano-Enhanced Lubricant in Minimum Quantity Lubrication Balling MillingPARK, Kyung-Hee; EWALD, Brent; KWON, Patrick Y et al.Journal of tribology. 2011, Vol 133, Num 3, issn 0742-4787, 031803.1-031803.8Article
Gap control for near-dry EDM milling with lead angleFUJIKI, Masahiro; KIM, Gap-Yong; JUN NI et al.International journal of machine tools & manufacture. 2011, Vol 51, Num 1, pp 77-83, issn 0890-6955, 7 p.Article